Categories: DesignJet How To, DesignJet 430, 450C, 455CA, 488CA, DesignJet 700 / 750, DesignJet Error Codes, 2000CP, 2500CP, 3000CP, 3500CP, 500/510 / 800 Plotter, 5000, 5500, DesignJet 1050C 1055 CM and Plus, DesignJet 4000, 4500, DesignJet Copier CC800PS Error Codes, DesignJet T1100 T1100PS T610, DesignJet Z6100, Z2100 and Z3100 Error Codes
After replacing the carriage belt on a DesignJet 400 series plotter an Error code of K L M is displayed on the front panel... more »
Computer Care
11/14/11
11/14/11
Carriage to media height adjustment DesignJet plotter models 430, 450C, 455CA and 488CA.
Adjusting the distance is important if the carriage is too high you will get unwanted spray around the ink dots, or over spray and your vertical lines will not be straight. If the carriage is too low you will get you will get ink smears or even have the carriage scrape the paper. more »
With the DesignJet 500 510 and 800 plotter models occasionally you will get printing that appears to be ghosting otherwise known as off set or double printing of lines and text. This offset printing usually has a few causes. Worn or damaged carriage belt, dirt or debris in the carriage motor drive gear teeth, improperly seated trailing cable or damaged, dirty or malfunctioning drive roller encoder sensor or drive roller encoder. more »
This error message generally appears when memory for an HP Designjet 1050C or 1055CM "A" model has been installed in a Designjet 1050C or 1055CM plus model (B models). The memory for the A models is not compatible with the plus series models. more »
Error Codes for DesignJet plotter models T1100 T1100PS and T610 System error codes are hexa-decimal based numbers generally caused byinternal system errors. The following pages contain a list of system errorcodes and their respective descriptions and recommended corrective actions. more »
XML Feeds